The Cleaning Tool Kit is used to remove excess plastic from transducer mounting holes prior to installation. Installation of transducers into plugged and/or dirty mounting holes is a major cause of installation-related damage.

The Cleaning Tool Kit allows the mounting hole to be properly cleaned and checked for integrity.

Cleaning tools are available for 1/2-20 mounting holes (CT12) and M18x1.5 mounting holes (CT18).

Note: The cleaning tool should be used when the polymer is molten. Care must be taken not to exceed the specified torque rating (125 inch-pounds) so as to not damage the tool.

清洁工具套件用于传感器安装之前清除安装孔多余的塑料物。

传感器安装于堵塞的和/或脏的安装孔，是安装相关损伤的主要原因。

清洁工具套件可适当清洁安装孔并检查其完整性。 

此清洁工具可用于1/2-20安装孔(CT12)和M18x1.5安装孔 (CT18)。

注意：应于聚合物为熔体状态时使用此清洁工具。为避免损伤工具，扭矩切勿超过规定的额定转矩(125 英寸-磅)。